Precautions for Operation of Wire Forming Machine

The appearance of the wire forming machine has made many manufacturing and forming industries convenient and fast. In retrospect, the advantages of the wire forming machine are many, but today it is mainly to popularize the precautions for the operation of the wire forming machine.

1. Strictly follow the safety operating procedures for machine tool workers, and wear safety protective equipment in accordance with the regulations.

2. Before operation, carefully check whether the motor, power switch, power distribution line and grounding device have any problems and are firm. The equipment checks that each control part and button are in the correct position.

3. Check the coincidence degree and firmness of the upper and lower molds; check whether each positioning device meets the requirements of the processing and manufacturing regulations.

4. Plug in the power supply, connect the power supply on the system panel control, and then start the oil pump.

5. After running the wire forming machine, run it dry for 5-10 minutes, and move the upper slider 2-3 times at full stroke. If you find any abnormal sound or fault, you should stop in time, handle the fault, and start working after confirming that there is no problem. .

6. When the wire forming machine is working, it should be commanded by one person, so that the operator and the feeding personnel can cooperate closely, and ensure that the cooperating personnel are all in a reliable position to send out the bending signal.

There are many types of wire forming machines, and the specific operation is based on the type, type and actual application requirements of the wire forming machine, so the precautions for the operation of the wire forming machine are essential.